Product ID:MURIATIC ACID, 23 DEG BE, 314
MSDS Date:03/03/1994
FSC:6810
NIIN:00N069652
MSDS Number: BZQRV

EM SCIENCE

480 DEMOCRAT RD
GIBBSTOWN, NJ 08027
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 609-354-9200

Cage: DO242

EM SCIENCE

70 GIBBSTOWN, NJ 08927 US

Telephone: 800-424-9300 (CHEMTREC)

Cage: DO242

HYDROCHLORIC ACID (SARA 302/313) (CERCLA)

CAS: 7647-01-0

RTECS: MW4025000

Fraction By Weight: 100%

OSHA PEL C 5 PPM

ACGIH TLV: C 5 PPM; 9495

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TECHNICAL SERVICE DEPARTMENT (609) 354-9200. THE

RTECS: 9999999ZZ

SX0861 SPILL-X-A ACID

RTECS: 9999999ZZ

ENGINEERING AND/OR ADMINISTRATIVE CONTROLS SHOULD

RTECS: 9999999ZZ

AND FULL LENGTH FACESHIELD .

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT CAUSES SEVERE BURNS AND
PERMANENT EYE DAMAGE. SKIN CONTACT CAUSES SEVERE BURNS, POSSIBLE
DEEP ULCERATION. INHALATION CAUSE DAMAGE TO NASAL AND RESPIRATORY
PASSAGES, PULMONARY EDEMA. INGEST ION CAUSES BURNS OF MOUTH, THROAT
AND GASTROINTESTINAL TRACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS.

First Aid:GET MEDICAL ASSISTANCE FOR ALL CASES OF OVEREXPOSURE. SKIN:
IMMEDIATELY FLUSH THOROUGHLY WITH LARGE AMOUNTS OF WATER. EYES:
IMMEDIATELY FLUSH THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES.
INHALATION: REMOVE TO FRESH AIR; GIVE ARTIFICIAL RESPIRATION IF
BREATHING HAS STOPPED. INGESTION: DO NOT INDUCE VOMITING; GIVE
WATER OR MILD IF CONSCIOUS; GET MEDICAL ATTENTION.

Flash Point:NONCOMBUSTIBLE
Extinguishing Media:WATER SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTACT WITH METALS PRODUCES HYDROGEN
WHICH MAY FORM EXPLOSIVE MIXTURES WITH AIR.

Spill Release Procedures:EVACUATE AREA OF ALL UNNEC PERS. WEAR SUITABLE
PROT EQUIP LISTED UNDER EXPOS/PERS PROT. ELIM ANY IGNIT SOURCES
UNTIL AREA IS DETERM TO BE FREE FROM EXPLOSION/FIRE HAZ. CNTN
RELEASE & ELIM ITS SOURCE, IF THIS CAN BE DONE W/OUT RISK. TAKE
UP& (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CNTNR TIGHTLY CLOSED. STORE IN A
COOL, WELL-VENT AREA SEPARATED FROM INCOMPAT MATS. DO NOT BRTH VAP.
DO NOT GET IN EYES, ON SKIN, OR ON CLOTHING.
Other Precautions:HANDLE EMPTY CONTAINERS WITH CAUTION. ADD ACID
CAUTIOUSLY TO WATER WHEN DILUTING - NEVER ADD WATER TO ACID.

Respiratory Protection:IF WORKPLACE EXPOS LIMIT(S) OF PROD/ANY
COMPONENT IS EXCEEDED (SEE TLV/PEL), NIOSH/MSHA APPRVD AIR SUPPLIED
RESP IS ADVISED IS ABSENCE OF PROPER ENVIRON CTRL. OSHA REGS ALSO
PERMIT OTHER NIOSH/MSHA (S EE YOUR SAFETY EQUIP SUPPLIER). (ING 4)
Ventilation:MATERIAL MUST BE HANDLED OR TRANSFERRED IN AN APPROVED FUME
HOOD OR WITH EQUIVALENT VENTILATION.
Protective Gloves:NEOPRENE, NITRILE OR EQUIVALENT.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(ING 5)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT TAKE
INTERNALLY. EYE WASH & SAFETY EQUIPMENT SHOULD BE READILY
AVAILABLE.
Supplemental Safety and Health
SPILL PROC:CONTAINERIZE FOR PROPER DISP AS DESCRIBED UNDER DISPOSAL.
COMPLY W/FED, STATE, & LOCAL REG ON RPTG RELS. REFER REGULATORY
INFO FOR REPORTABLE QTY & OTHER REGULATORY DATA. EM SCIENCE REC SPI
LL-X NEUT & ABSORB AGENTS FOR VARIOUS TYPES OF SPILLS. ADDN INFO ON
SPILL-X PROD CAN BE PROVIDED THRU EM SCIENCE (ING 2)

Boiling Pt:B.P. Text:230F,110C
Melt/Freeze Pt:M.P/F.P Text:-101F,-74C
Vapor Pres:160 @ 20C
Vapor Density:1.25
Spec Gravity:1.1885 (H*2O=1)
Evaporation Rate & Reference:2.0 (BUAC = 1)
Solubility in Water:MISCIBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID; ACRID ODOR.
Percent Volatiles by Volume:+99.9

Stability Indicator/Materials to Avoid:YES
BASES, ALKALIES AND AMINES; CONTACT WITH METALS PRODUCES HYDROGEN.
Stability Condition to Avoid:HEAT; CONTACT WITH METALS.
Hazardous Decomposition Products:TOXIC HYDROGEN CHLORIDE GAS.

Waste Disposal Methods:SPECIFIED TECHNOLOGY-NEUTRALIZE TO PH 6-9.
CONTACT YOUR LOCAL PERMITTED WASTE DISPOSAL SITE (TSD) FOR
PERMISSIBLE TREATMENT SITES. ALWAYS CONTACT A PERMITTED WASTE
DISPOSER (TSD) TO ASSURE COMPLIANCE W/ALL CURRENT LOCAL, & STATE
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.